ModbusTcp协议是基于tcp的，但不是说一定要通过tcp协议才能传输，只要能传输二进制的地方都可以。比如WebSocket协议。
但由于目前我只有tcp上面的modbus服务器实现,所以我必须先用tcp连接借助已有工具来验证我的服务器是否写正确。
ModBusTCP协议报文比较复杂，主要是区分了3组类型
理论上将报文格式的种类从1种变成了8种。
但是在响应读数据时，没有区分数据量，而是到请求中去查找，听说是为了减少传输量。因此实际格式种类是3组6种。
请求读数据报文
| 事务标识符 | 协议标识符 | 报文长度 | 单元标识符 | 功能码 | 起始地址 | 读取数量 | |
|---|---|---|---|---|---|---|---|
| 字段长度 | 2 byte | 2 byte | 2 byte | 1 byte | 1 byte | 2 byte | 2 byte |
| 数据类型 | ushort | ushort | ushort | byte | byte | ushort | ushort |
| 自增 | 一般为0 | 6,从单元标识符开始算 | 一般为0 | 链接 |
响应读数据报文
| 事务标识符 | 协议标识符 | 报文长度 | 单元标识符 | 功能码 | 数据字节数 | 数据 |
|---|---|---|---|---|---|---|
| 2 byte | 2 byte | 2 byte | 1 byte | 1 byte | 1 byte | n byte |
值得注意的是,响应报文中没有包含请求的数据数量，只能从请求中获得。比如是7个线圈还是8个线圈是看不出来的。
这其实就限制了程序结构，应该在同一个上下文中声明请求和响应变量。
请求写单个数据报文
| 事务标识符 | 协议标识符 | 报文长度 | 单元标识符 | 功能码 | 起始地址 | 数据 |
|---|---|---|---|---|---|---|
| 2 byte | 2 byte | 2 byte | 1 byte | 1 byte | 2 byte | 2 byte |
响应写单个数据报文
| 事务标识符 | 协议标识符 | 报文长度 | 单元标识符 | 功能码 | 起始地址 | 数据 |
|---|---|---|---|---|---|---|
| 2 byte | 2 byte | 2 byte | 1 byte | 1 byte | 2 byte | 2 byte |
请求写单个数据的响应实际上是原样返回请求。
写1位线圈和写16位寄存器都传输了2个字节，这很奇怪。
原来是ModBusTCP定义写单个线圈用0xff00表示1，0x0000表示0。
请求写多个数据报文
| 事务标识符 | 协议标识符 | 报文长度 | 单元标识符 | 功能码 | 起始地址 | 数量 | 字节数 | 数据 |
|---|---|---|---|---|---|---|---|---|
| 2 byte | 2 byte | 2 byte | 1 byte | 1 byte | 2 byte | 2 byte | 1 byte | n byte |
请求写多个数据时，如果是线圈，现在又变成了一位代表一个数据，而不是原来的2字节代表单个数据
还需要注意的是modbus采用大端传输，意味着一个字节中如果写了四个线圈，要从右向左数。
响应写多个数据报文
| 事务标识符 | 协议标识符 | 报文长度 | 单元标识符 | 功能码 | 起始地址 | 数量 |
|---|---|---|---|---|---|---|
| 2 byte | 2 byte | 2 byte | 1 byte | 1 byte | 2 byte | 2 byte |
从功能码字段往后，字段不确定，所以统一用Data表示。
在各个响应方法里根据不同功能码对数据进行处理。
//WebModbus.cs
// Modbus报文
public class ADUMessage
{
// 事务标识符
public ushort Transaction { get; set; }
// 协议标识符
public ushort Protocol { get; set; }
// 报文长度
public ushort Length { get; set; }
// 单元标识符
public byte Unit { get; set; }
// 功能码
public byte FunctionCode { get; set; }
// 数据
public byte[] Data { get; set; }
public static ADUMessage Deserialize(byte[] buffer){}
public static byte[] Serialze(ADUMessage message){}
}
modbusTCP协议规定了服务器实现线圈、寄存器2种数据模型，每种又分为只读、可读可写。于是服务器一共要提供4个存储栈。
因为报文起始地址字段有2个字节，所以寻址范围是0-65535
| 栈地址 | 线圈栈 | 离散量输入栈 | 只读寄存器栈 | 读写寄存器栈 |
|---|---|---|---|---|
| 65535 | 0 | 0 | 0xFF C1 | 0x00 00 |
| 65534 | 0 | 1 | 0x00 00 | 0x00 00 |
| ... | 1 | 0 | 0x00 00 | 0x00 00 |
| 1 | 0 | 0 | 0x00 00 | 0x08 00 |
| 0 | 0 | 0 | 0x00 00 | 0x00 1A |
其中线圈栈和离散量输入栈是bool类型的，实际实现的时候可以是数字0、1，也可以是布尔true,false，还可以是字符串"on","off"
如何存储，存储的数据类型是什么？这不重要。重要的是传输的时候采用规定格式就行。
采用第3种报文写单线圈时，如果要传输true，要使用0xFF 00。传输false，要使用0x00 00
其它时候都用一个bit位表示true和false
比如线圈栈，从地址0开始读9个数据。就是小端字节序0x0f 00。
| 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | ... |
|---|---|---|---|---|---|---|---|---|---|
| 1 | 1 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 |
当然，要从请求报文中知道截取取响应数据的哪几位。
//WebModbus.cs
// 数据仓库,144KB
public class DataStore
{
// 读写16位寄存器，64KB
public ushort[] HoldingRegisters;
// 只读16位寄存器，64KB
public ushort[] InputRegisters;
// 读写1位线圈，8KB
public bool[] CoilDiscretes;
// 只读1位线圈，8KB
public bool[] CoilInputs;
public DataStore()
{
HoldingRegisters = new ushort[65536];
InputRegisters = new ushort[65536];
CoilDiscretes = new bool[65536];
CoilInputs = new bool[65536];
}
// 读 读写16位寄存器
public ushort[] ReadHoldingRegisters(ushort startIndex, ushort length){}
// 读 只读16位寄存器
public ushort[] ReadInputRegisters(ushort startIndex, ushort length){}
// 读 读写1位线圈
public bool[] ReadCoilDiscretes(ushort startIndex, ushort length){}
// 读 只读1位线圈
public bool[] ReadCoilInputs(ushort startIndex, ushort length){}
// 写 读写16位寄存器
public void WriteHoldingRegisters(ushort startIndex, ushort[] data){}
//写 读写1位线圈
public void WriteCoilDiscretes(ushort startIndex, bool[] data){}
}
功能码主要用来操作这4个栈,因为栈分读写和只读，写入还分为多个数据和单个数据。所以主要有8种功能码
相应的
字节序这个东西还是当初上操作系统课时老师讲过，以后再没接触。不过要自己处理字节流时又面临这个问题了。
modbusTcp主要采用大端字节序方式传输数据。
为什么说主要呢，因为唯独线圈数据是采用小端的方式传输的，其它数据都是大端传输。这要特别注意。
BinaryReader和BinaryWriter来处理接收到的和要传输的字节流。reader.ReadUInt16(),如果我们传的字节流是0x00 01,它会以为是ushort 256，而不是ushort 1。override这个方法，翻转字节数组，按照大端方式读取。//BigEndianBinaryReader.cs
public override short ReadInt16()
{
var data = base.ReadBytes(2);
Array.Reverse(data);
return BitConverter.ToInt16(data, 0);
}
modbus服务器要做的就是
接收消息，反序列化为消息对象
然后判断怎么响应
读取数据栈，构造消息
序列化后响应
核心方法
//WebModbus.cs
public ADUMessage HandleRequest(byte[] buffer)
{
ADUMessage request = ADUMessage.Deserialize(buffer);
switch (request.FunctionCode)
{
//读 读写线圈
case 0x01:
return Response_01(request);
//读 只读线圈
case 0x02:
return Response_02(request);
//读 读写寄存器
case 0x03:
return Response_03(request);
//读 只读寄存器
case 0x04:
return Response_04(request);
//写 读写一个线圈
case 0x05:
return Response_05(request);
//写 读写一个寄存器
case 0x06:
return Response_06(request);
//写 读写多个线圈
case 0x0f:
return Response_0f(request);
//写 读写多个寄存器
case 0x10:
return Response_10(request);
default:
return Response_01(request);
}
}
程序所需命令行参数的一种方式是在项目文件种指定，这在调试时比较方便
<PropertyGroup>
<StartArguments>5234</StartArguments>
</PropertyGroup>
/// <summary>
/// 数据仓库,144KB
/// </summary>
public class DataStore
{
/// <summary>
/// 读写16位寄存器，64KB
/// </summary>
public ushort[] HoldingRegisters;
/// <summary>
/// 只读16位寄存器，64KB
/// </summary>
public ushort[] InputRegisters;
/// <summary>
/// 读写1位线圈，8KB
/// </summary>
public bool[] CoilDiscretes;
/// <summary>
/// 只读1位线圈，8KB
/// </summary>
public bool[] CoilInputs;
public DataStore()
{
HoldingRegisters = new ushort[65536];
InputRegisters = new ushort[65536];
CoilDiscretes = new bool[65536];
CoilInputs = new bool[65536];
}
/// <summary>
/// 读 读写16位寄存器
/// </summary>
/// <param name="startIndex"></param>
/// <param name="length"></param>
/// <returns></returns>
public ushort[] ReadHoldingRegisters(ushort startIndex, ushort length)
{
return HoldingRegisters.Take(new Range(new Index(startIndex), new Index(startIndex + length))).ToArray();
}
/// <summary>
/// 读 只读16位寄存器
/// </summary>
/// <param name="startIndex"></param>
/// <param name="length"></param>
/// <returns></returns>
public ushort[] ReadInputRegisters(ushort startIndex, ushort length)
{
return InputRegisters.Take(new Range(new Index(startIndex), new Index(startIndex + length))).ToArray();
}
/// <summary>
/// 读 读写1位线圈
/// </summary>
/// <param name="startIndex"></param>
/// <param name="length"></param>
/// <returns></returns>
public bool[] ReadCoilDiscretes(ushort startIndex, ushort length)
{
return CoilDiscretes.Take(new Range(new Index(startIndex), new Index(startIndex + length))).ToArray();
}
/// <summary>
/// 读 只读1位线圈
/// </summary>
/// <param name="startIndex"></param>
/// <param name="length"></param>
/// <returns></returns>
public bool[] ReadCoilInputs(ushort startIndex, ushort length)
{
return CoilInputs.Take(new Range(new Index(startIndex), new Index(startIndex + length))).ToArray();
}
/// <summary>
/// 写 读写16位寄存器
/// </summary>
/// <param name="startIndex"></param>
/// <param name="data"></param>
public void WriteHoldingRegisters(ushort startIndex, ushort[] data)
{
for (int i = 0; i < data.Length; i++)
{
if (startIndex+i < 65536)
{
HoldingRegisters[startIndex + i] = data[i];
}
}
}
/// <summary>
/// 写 读写1位线圈
/// </summary>
/// <param name="startIndex"></param>
/// <param name="data"></param>
public void WriteCoilDiscretes(ushort startIndex, bool[] data)
{
for (int i = 0; i < data.Length; i++)
{
if (startIndex + i < 65536)
{
CoilDiscretes[startIndex + i] = data[i];
}
}
}
}
/// <summary>
/// Modbus报文
/// </summary>
public class ADUMessage
{
/// <summary>
/// 事务标识符
/// </summary>
public ushort Transaction { get; set; }
/// <summary>
/// 协议标识符
/// </summary>
public ushort Protocol { get; set; }
/// <summary>
/// 报文长度
/// </summary>
public ushort Length { get; set; }
/// <summary>
/// 单元标识符
/// </summary>
public byte Unit { get; set; }
/// <summary>
/// 功能码
/// </summary>
public byte FunctionCode { get; set; }
/// <summary>
/// 数据
/// </summary>
public byte[] Data { get; set; }
public static ADUMessage Deserialize(byte[] buffer)
{
//BinaryReader读取方式是小端（右边是高字节），而modbus是大端传输（左边是高字节）
BinaryReader reader = new BigEndianBinaryReader(new MemoryStream(buffer));
ADUMessage adu = new ADUMessage()
{
Transaction = reader.ReadUInt16(),
Protocol = reader.ReadUInt16(),
Length = reader.ReadUInt16(),
Unit = reader.ReadByte(),
FunctionCode = reader.ReadByte(),
Data = reader.ReadBytes(buffer.Length - 8)
};
return adu;
}
public static byte[] Serialze(ADUMessage message)
{
using (MemoryStream ms=new MemoryStream())
{
BinaryWriter writer = new BigEndianBinaryWriter(ms);
writer.Write(message.Transaction);
writer.Write(message.Protocol);
writer.Write(message.Length);
writer.Write(message.Unit);
writer.Write(message.FunctionCode);
writer.Write(message.Data);
return ms.ToArray();
}
}
}
public class WebModbusServer
{
public DataStore store = new DataStore();
public ADUMessage HandleRequest(byte[] buffer)
{
ADUMessage request = ADUMessage.Deserialize(buffer);
switch (request.FunctionCode)
{
//读 读写线圈
case 0x01:
return Response_01(request);
//读 只读线圈
case 0x02:
return Response_02(request);
//读 读写寄存器
case 0x03:
return Response_03(request);
//读 只读寄存器
case 0x04:
return Response_04(request);
//写 读写一个线圈
case 0x05:
return Response_05(request);
//写 读写一个寄存器
case 0x06:
return Response_06(request);
//写 读写多个线圈
case 0x0f:
return Response_0f(request);
//写 读写多个寄存器
case 0x10:
return Response_10(request);
default:
return Response_01(request);
}
}
public byte[] CoilToBytes(bool[] bools)
{
int byteCount = (bools.Length + 7) / 8; // 计算所需的字节数
byte[] bytes = new byte[byteCount];
for (int i = 0; i < bools.Length; i++)
{
int byteIndex = i / 8; // 计算当前布尔值应该存储在哪个字节中
int bitIndex = i % 8; // 计算当前布尔值应该存储在字节的哪个位上
if (bools[i])
{
// 设置对应位为 1
bytes[byteIndex] |= (byte)(1 << bitIndex);
}
else
{
// 对应位保持为 0，无需额外操作
}
}
return bytes;
}
/// <summary>
/// 读 读写线圈
/// </summary>
/// <param name="request"></param>
/// <returns></returns>
private ADUMessage Response_01(ADUMessage request)
{
BinaryReader reader = new BigEndianBinaryReader(new MemoryStream(request.Data));
BinaryWriter writer;
ushort StartAddress, DataNumber;
StartAddress = reader.ReadUInt16();
DataNumber = reader.ReadUInt16();
bool[] data = store.ReadCoilDiscretes(StartAddress, DataNumber);
byte[] coilBytes = CoilToBytes(data);
byte[] dataBytes = new byte[coilBytes.Length + 1];
writer = new BinaryWriter(new MemoryStream(dataBytes));
writer.Write((byte)coilBytes.Length);
writer.Write(coilBytes);
ADUMessage response = new ADUMessage()
{
Transaction = request.Transaction,
Protocol = request.Protocol,
Length = (ushort)(dataBytes.Length + 2),
Unit = request.Unit,
FunctionCode = request.FunctionCode,
Data = dataBytes,
};
return response;
}
/// <summary>
/// 读 只读线圈
/// </summary>
/// <param name="request"></param>
/// <returns></returns>
private ADUMessage Response_02(ADUMessage request)
{
BinaryReader reader = new BigEndianBinaryReader(new MemoryStream(request.Data));
BinaryWriter writer;
ushort StartAddress, DataNumber;
StartAddress = reader.ReadUInt16();
DataNumber = reader.ReadUInt16();
bool[] data = store.ReadCoilInputs(StartAddress, DataNumber);
byte[] coilBytes = CoilToBytes(data);
byte[] dataBytes = new byte[coilBytes.Length + 1];
writer = new BinaryWriter(new MemoryStream(dataBytes));
writer.Write((byte)coilBytes.Length);
writer.Write(coilBytes);
ADUMessage response = new ADUMessage()
{
Transaction = request.Transaction,
Protocol = request.Protocol,
Length = (ushort)(dataBytes.Length + 2),
Unit = request.Unit,
FunctionCode = request.FunctionCode,
Data = dataBytes,
};
return response;
}
/// <summary>
/// 读 读写寄存器
/// </summary>
/// <param name="request"></param>
/// <returns></returns>
private ADUMessage Response_03(ADUMessage request)
{
BinaryReader reader = new BigEndianBinaryReader(new MemoryStream(request.Data));
BinaryWriter writer;
ushort StartAddress, DataNumber;
StartAddress = reader.ReadUInt16();
DataNumber = reader.ReadUInt16();
ushort[] data = store.ReadHoldingRegisters(StartAddress, DataNumber);
byte[] dataBytes = new byte[data.Length * 2 + 1];
writer = new BigEndianBinaryWriter(new MemoryStream(dataBytes));
writer.Write((byte)(data.Length * 2));
foreach (ushort value in data)
{
writer.Write(value);
}
Array.Resize(ref dataBytes, dataBytes.Length + 1);
ADUMessage response = new ADUMessage()
{
Transaction = request.Transaction,
Protocol = request.Protocol,
Length = (ushort)(dataBytes.Length + 2),
Unit = request.Unit,
FunctionCode = request.FunctionCode,
Data = dataBytes,
};
return response;
}
/// <summary>
/// 读 只读寄存器
/// </summary>
/// <param name="request"></param>
/// <returns></returns>
private ADUMessage Response_04(ADUMessage request)
{
BinaryReader reader = new BigEndianBinaryReader(new MemoryStream(request.Data));
BinaryWriter writer;
ushort StartAddress, DataNumber;
StartAddress = reader.ReadUInt16();
DataNumber = reader.ReadUInt16();
ushort[] data = store.ReadInputRegisters(StartAddress, DataNumber);
byte[] dataBytes = new byte[data.Length * 2 + 1];
writer = new BigEndianBinaryWriter(new MemoryStream(dataBytes));
writer.Write((byte)(data.Length * 2));
foreach (ushort value in data)
{
writer.Write(value);
}
Array.Resize(ref dataBytes, dataBytes.Length + 1);
ADUMessage response = new ADUMessage()
{
Transaction = request.Transaction,
Protocol = request.Protocol,
Length = (ushort)(dataBytes.Length + 2),
Unit = request.Unit,
FunctionCode = request.FunctionCode,
Data = dataBytes,
};
return response;
}
/// <summary>
/// 写 读写一个线圈
/// </summary>
/// <param name="request"></param>
/// <returns></returns>
private ADUMessage Response_05(ADUMessage request)
{
BinaryReader reader = new BigEndianBinaryReader(new MemoryStream(request.Data));
ushort StartAddress, coli;
StartAddress = reader.ReadUInt16();
coli = reader.ReadUInt16();
store.WriteCoilDiscretes(StartAddress, new bool[] { coli ==0xff00?true:false});
return request;
}
/// <summary>
/// 写 读写一个寄存器
/// </summary>
/// <param name="request"></param>
/// <returns></returns>
private ADUMessage Response_06(ADUMessage request)
{
BinaryReader reader = new BigEndianBinaryReader(new MemoryStream(request.Data));
ushort StartAddress, register;
StartAddress = reader.ReadUInt16();
register = reader.ReadUInt16();
store.WriteHoldingRegisters(StartAddress, new ushort[] { register });
return request;
}
/// <summary>
/// 写 读写多个线圈
/// </summary>
/// <param name="request"></param>
/// <returns></returns>
private ADUMessage Response_0f(ADUMessage request)
{
BinaryReader reader = new BigEndianBinaryReader(new MemoryStream(request.Data));
ushort StartAddress, DataNumber;
StartAddress = reader.ReadUInt16();
DataNumber = reader.ReadUInt16();
byte byteNumber = reader.ReadByte();
//线圈是小端传输
byte[] bytes = reader.ReadBytes(byteNumber);
bool[] data=new bool[DataNumber];
byte index = 0;
foreach (var item in bytes)
{
//1000 0000
byte rr = (byte)0x01;
for (int i = 0; i < 8; i++)
{
if (index< DataNumber)
{
var result = rr & item;
if (result > 0)
{
data[index] = true;
}
else
{
data[index] = false;
}
//0100 0000
rr <<= 1;
index++;
}
else
{
break;
}
}
}
store.WriteCoilDiscretes(StartAddress, data);
return request;
}
/// <summary>
/// 写 读写多个寄存器
/// </summary>
/// <param name="request"></param>
/// <returns></returns>
private ADUMessage Response_10(ADUMessage request)
{
//寄存器是大端传输
BinaryReader reader = new BigEndianBinaryReader(new MemoryStream(request.Data));
ushort StartAddress, DataNumber;
StartAddress = reader.ReadUInt16();
DataNumber = reader.ReadUInt16();
byte byteNumber = reader.ReadByte();
ushort[] data = new ushort[byteNumber / 2];
for (int i = 0; i < data.Length; i++)
{
data[i] = reader.ReadUInt16();
}
store.WriteHoldingRegisters(StartAddress, data);
return request;
}
}
public class BigEndianBinaryReader : BinaryReader
{
public BigEndianBinaryReader(Stream input) : base(input)
{
}
public override short ReadInt16()
{
var data = base.ReadBytes(2);
Array.Reverse(data);
return BitConverter.ToInt16(data, 0);
}
public override ushort ReadUInt16()
{
var data = base.ReadBytes(2);
Array.Reverse(data);
return BitConverter.ToUInt16(data, 0);
}
public override int ReadInt32()
{
var data = base.ReadBytes(4);
Array.Reverse(data);
return BitConverter.ToInt32(data, 0);
}
public override uint ReadUInt32()
{
var data = base.ReadBytes(4);
Array.Reverse(data);
return BitConverter.ToUInt32(data, 0);
}
public override long ReadInt64()
{
var data = base.ReadBytes(8);
Array.Reverse(data);
return BitConverter.ToInt64(data, 0);
}
public override float ReadSingle()
{
var data = base.ReadBytes(4);
Array.Reverse(data);
return BitConverter.ToSingle(data, 0);
}
public override double ReadDouble()
{
var data = base.ReadBytes(8);
Array.Reverse(data);
return BitConverter.ToDouble(data, 0);
}
// 可以继续添加其他方法来支持更多数据类型的大端读取
}
public class BigEndianBinaryWriter : BinaryWriter
{
public BigEndianBinaryWriter(Stream input) : base(input)
{
}
public override void Write(ushort value)
{
var bytes = BitConverter.GetBytes(value);
Array.Reverse(bytes);
base.Write(bytes);
}
public override void Write(short value)
{
var bytes = BitConverter.GetBytes(value);
Array.Reverse(bytes);
base.Write(bytes);
}
public override void Write(uint value)
{
var bytes = BitConverter.GetBytes(value);
Array.Reverse(bytes);
base.Write(bytes);
}
public override void Write(int value)
{
var bytes = BitConverter.GetBytes(value);
Array.Reverse(bytes);
base.Write(bytes);
}
public override void Write(ulong value)
{
var bytes = BitConverter.GetBytes(value);
Array.Reverse(bytes);
base.Write(bytes);
}
public override void Write(long value)
{
var bytes = BitConverter.GetBytes(value);
Array.Reverse(bytes);
base.Write(bytes);
}
// 可以继续添加其他方法来支持更多数据类型的大端写入
}
internal class Program
{
static WebModbusServer webModbusServer;
static void Main(string[] args)
{
webModbusServer = new WebModbusServer();
//服务器
if (args.Length == 1)
{
//webModbusServer.store.WriteCoilDiscretes(0, new bool[] { true, true });
//webModbusServer.store.CoilInputs[0] = true;
//webModbusServer.store.CoilInputs[1] = true;
StartServer(args[0]);
}
}
private static void StartServer(string args)
{
int serverPort = Convert.ToInt32(args);
var server = new TcpListener(IPAddress.Parse("127.0.0.1"), serverPort);
Console.WriteLine($"TCP服务器 127.0.0.1:{serverPort}");
server.Start();
int cnt = 0;
Task.Run(async () =>
{
List<TcpClient> clients = new List<TcpClient>();
while (true)
{
TcpClient client = await server.AcceptTcpClientAsync();
clients.Add(client);
cnt++;
var ep = client.Client.RemoteEndPoint as IPEndPoint;
Console.WriteLine($"TCP客户端_{cnt} {ep.Address}:{ep.Port}");
//给这个客户端开一个聊天线程
//操作系统将会根据游客端口对应表将控制权交给对应游客线程
StartModbus(client);
}
}).Wait();
}
public static async Task StartModbus(TcpClient client)
{
var buffer = new byte[1024 * 4];
while (client.Connected)
{
int msgLength = await client.Client.ReceiveAsync(new ArraySegment<byte>(buffer));
//关闭连接时会接收到一次空消息，不知道为什么
if (msgLength>0)
{
PrintBytes(buffer.Take(msgLength).ToArray(), "请求 ");
ADUMessage response = webModbusServer.HandleRequest(buffer.Take(msgLength).ToArray());
await client.Client.SendAsync(ADUMessage.Serialze(response));
PrintBytes(ADUMessage.Serialze(response), "响应 ");
}
}
}
public static void PrintBytes(byte[] bytes,string prefix="")
{
Console.Write(prefix);
for (int i = 0; i < bytes.Length; i++)
{
if (i < 2)
{
Console.ForegroundColor = ConsoleColor.Red;
}
else if(i<4)
{
Console.ForegroundColor = ConsoleColor.Green;
}
else if(i<6)
{
Console.ForegroundColor= ConsoleColor.Blue;
}
else if (i < 7)
{
Console.ForegroundColor = ConsoleColor.Yellow;
}
else if (i<8)
{
Console.ForegroundColor = ConsoleColor.DarkCyan;
}
else
{
Console.ForegroundColor = ConsoleColor.White;
}
Console.Write(bytes[i].ToString("X2") + " ");
}
Console.WriteLine();
}
}