http://arthurchiao.art/blog/monitoring-network-stack/ 看不懂...
This post shows how to collecte metrics from your Linux network stack (with bash scripts), and monitoring the stack status with Prometheus and Grafana.
This post assumes you have read through the following posts (kernel 3.13 + intel 1Gbps NIC driver):
Or my updated versions (kernel 5.10 + mellanox 25Gbps NIC driver) if you can read Chinese:
Besides, some basic understandings of Prometheus and Grafana are needed.
Fig. Steps of Linux kernel receiving data process and the corresponding chapters in this post
ethtool -S$ sudo ethtool -S eth0
NIC statistics:
rx_packets: 597028087
tx_packets: 5924278060
rx_bytes: 112643393747
tx_bytes: 990080156714
rx_broadcast: 96
tx_broadcast: 116
rx_multicast: 20294528
....
Note that depending on specific NICs/drivers, some of the metrics may be updated in the kernel code (software), some may be in hardware. Refer to the datasheets of the your NICs and the corresponding drivers if needed.
/proc/net/dev/proc/net/dev also provides some network device level statistics:
$ cat /proc/net/dev
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
eth0: 152214 9700 0 2 0 0 0 203860 9905984 62604 0 0 0 0 0 0
lo: 463836 57535 0 0 0 0 0 0 4263836 18535 0 0 0 0 0 0
Actually this is only a subnet of /sys/class/net/<nic>/statistics, as introduced in the below section.
/sys/class/net/<nic>/statisticsStatistics from sysfs provides an uppper layer view of the NIC RX/TX stats.
NIC stats from /sys/class/net/<nic>/statistics:
$ ls /sys/class/net/eth0/statistics
collisions rx_dropped rx_missed_errors tx_bytes tx_fifo_errors
multicast rx_errors rx_nohandler tx_carrier_errors tx_heartbeat_errors
rx_bytes rx_fifo_errors rx_over_errors tx_compressed tx_packets
rx_compressed rx_frame_errors rx_packets tx_dropped tx_window_errors
rx_crc_errors rx_length_errors tx_aborted_errors tx_errors
$ cat /sys/class/net/eth0/statistics/rx_crc_errors
0
Again, look into the spcific driver code if you’d like to ensure when and where a specific counter is updated.
We will arrange our metrics in Prometheus format:
$ cat collect-network-stats.sh
#!/bin/bash
PREFIX="network"
nic_stats_output() {
NIC=$1
METRIC=$PREFIX"_nic_stats";
for f in $(ls /sys/class/net/$NIC/statistics/); do
TAGS="{\"nic\":\"$NIC\",\"type\":\"$f\"}";
VAL=$(cat /sys/class/net/$NIC/statistics/$f 2>/dev/null);
echo $METRIC$TAGS $VAL;
done
}
nic_stats_output eth0
nic_stats_output eth1
Test:
$ ./collect-network-stats.sh
network_nic_stats{"nic":"eth0","type":"collisions"} 0
network_nic_stats{"nic":"eth0","type":"multicast"} 17775912
network_nic_stats{"nic":"eth0","type":"rx_bytes"} 322700688616
network_nic_stats{"nic":"eth0","type":"rx_compressed"} 0
network_nic_stats{"nic":"eth0","type":"rx_crc_errors"} 0
network_nic_stats{"nic":"eth0","type":"rx_dropped"} 0
network_nic_stats{"nic":"eth0","type":"rx_errors"} 0
...
Push the metrics into your prometheus server, or, configure your prometheus to pull this data, we could create a panel like this:
Where, the Grafane query is:
avg(irate(network_nic_stats{host="$hostname"})*60) by (nic, type)
Note that our collecting agent automatically added a new tag host=<hostname> to all the metrics, so we could filter the metrics with host="$hostname".
/proc/interrupts)Information included:
Note that these are interrupt counts, not number of packets - for example, if Interrupt Coalescing is enabled, a batch of packets will trigger only one IRQ.
$ cat /proc/interrupts
CPU0 CPU1 CPU2 ... CPU30 CPU31
...
139: 0 0 0 ... 0 0 IR-PCI-MSI 1572864-edge eth0-tx-0
140: 0 0 0 ... 0 0 IR-PCI-MSI 1572865-edge eth0-rx-1
141: 0 0 0 ... 0 0 IR-PCI-MSI 1572866-edge eth0-rx-2
142: 0 0 308405 ... 0 0 IR-PCI-MSI 1572867-edge eth0-rx-3
143: 0 0 0 ... 0 0 IR-PCI-MSI 1572868-edge eth0-rx-4
144: 0 0 4 ... 0 0 IR-PCI-MSI 1574912-edge eth1-tx-0
145: 0 0 0 ... 0 0 IR-PCI-MSI 1574913-edge eth1-rx-1
146: 0 38 673 ... 0 0 IR-PCI-MSI 1574914-edge eth1-rx-2
147: 0 75604 0 ... 0 0 IR-PCI-MSI 1574915-edge eth1-rx-3
148: 0 3086 824199 ... 0 0 IR-PCI-MSI 1574916-edge eth1-rx-4
...
Add this code snippet to our script:
interrupts_output() {
PATTERN=$1
METRIC=$PREFIX"_interrupts_by_cpu"
egrep "$PATTERN" /proc/interrupts | awk -v metric=$METRIC \
'{ for (i=2;i<=NF-3;i++) sum[i]+=$i;}
END {
for (i=2;i<=NF-3; i++) {
tags=sprintf("{\"cpu\":\"%d\"}", i-2);
printf(metric tags " " sum[i] "\n");
}
}'
METRIC=$PREFIX"_interrupts_by_queue"
egrep "$PATTERN" /proc/interrupts | awk -v metric=$METRIC \
'{ for (i=2;i<=NF-3; i++)
sum+=$i;
tags=sprintf("{\"queue\":\"%s\"}", $NF);
printf(metric tags " " sum "\n");
sum=0;
}'
}
# interface patterns
# eth: intel
# mlx: mellanox
interrupts_output "eth|mlx"
$ ./collect-network-stats.sh
network_interrupts_by_cpu{"cpu":"0"} 0
network_interrupts_by_cpu{"cpu":"1"} 6078192
network_interrupts_by_cpu{"cpu":"2"} 85118785
...
network_interrupts_by_queue{"queue":"eth0-tx-0"} 190533384
network_interrupts_by_queue{"queue":"eth0-rx-1"} 26873848
network_interrupts_by_queue{"queue":"eth0-rx-2"} 23715431
network_interrupts_by_queue{"queue":"eth0-rx-3"} 87702361
...
network_interrupts_by_queue{"queue":"eth1-rx-4"} 3119407
avg(irate(network_interrupts_by_cpu{host=~"$hostname"})) by (cpu)
avg(irate(network_interrupts_by_queue{host=~"$hostname"})) by (queue)
/proc/softirqs)$ cat /proc/softirqs
CPU0 CPU1 ... CPU62 CPU63
HI: 1 0 ... 0 0
TIMER: 20378862 2149097 ... 0 0
NET_TX: 5 1 ... 0 0
NET_RX: 1179 1868 ... 0 0
BLOCK: 88034 33007 ... 0 0
IRQ_POLL: 0 0 ... 0 0
TASKLET: 22 0 ... 0 0
SCHED: 13906041 1474443 ... 0 0
HRTIMER: 0 0 ... 0 0
RCU: 12121418 1964562 ... 0 0
softirqs_output() {
METRIC=$PREFIX"_softirqs"
for dir in "NET_RX" "NET_TX"; do
grep $dir /proc/softirqs | awk -v metric=$METRIC -v dir=$dir \
'{ for (i=2;i<=NF-1;i++) {
tags=sprintf("{\"cpu\":\"%d\", \"direction\": \"%s\"}", i-2, dir); \
printf(metric tags " " $i "\n"); \
}
}'
done
}
softirqs_output
$ ./collect-network-stats.sh
network_softirqs{"cpu":"0", "direction": "NET_RX"} 196082
network_softirqs{"cpu":"1", "direction": "NET_RX"} 119888284
network_softirqs{"cpu":"2", "direction": "NET_RX"} 189840914
network_softirqs{"cpu":"3", "direction": "NET_RX"} 114621858
network_softirqs{"cpu":"4", "direction": "NET_RX"} 1453599
network_softirqs{"cpu":"5", "direction": "NET_RX"} 192694791
network_softirqs{"cpu":"6", "direction": "NET_RX"} 49328487
...
Grafana queries:
avg(irate(network_interrupts_by_cpu{host="$hostname",direction="NET_RX"})) by (cpu)
avg(irate(network_interrupts_by_cpu{host="$hostname",direction="NET_TX"})) by (cpu)
/proc/net/softnet_stat)$ cat /proc/net/softnet_stat
00049007 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
074c3e6e 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
0c98d81b 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
07212d42 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
0018ad7c 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00037314 00000000 00000002 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
...
softnet_stat_output() {
TYP=$1
IDX=$2
METRIC=$PREFIX"_softnet_stat"
VAL=$(cat /proc/net/softnet_stat | awk -v IDX="$IDX" '{sum+=strtonum("0x"$IDX);} END{print sum;}')
TAGS="{\"type\":\"$TYP\"}";
echo $METRIC$TAGS $VAL;
}
# Format of /proc/net/softnet_stat:
#
# column 1 : received frames
# column 2 : dropped
# column 3 : time_squeeze
# column 4-8: all zeros
# column 9 : cpu_collision
# column 10 : received_rps
# column 11 : flow_limit_count
#
# http://arthurchiao.art/blog/tuning-stack-rx-zh/
softnet_stat_output "dropped" 2
softnet_stat_output "time_squeeze" 3
softnet_stat_output "cpu_collision" 9
softnet_stat_output "received_rps" 10
softnet_stat_output "flow_limit_count" 11
Run:
$ ./collect-network-stats.sh
network_softnet_stat{"type":"dropped"} 0
network_softnet_stat{"type":"time_squeeze"} 4
network_softnet_stat{"type":"cpu_collision"} 0
network_softnet_stat{"type":"received_rps"} 0
network_softnet_stat{"type":"flow_limit_count"} 0
Grafana queries:
avg(irate(network_softnet_stat{host="$hostname"})) by (type)
/proc/net/snmp)$ cat /proc/net/snmp
Ip: Forwarding DefaultTTL InReceives InHdrErrors InAddrErrors ForwDatagrams InUnknownProtos InDiscards InDelivers OutRequests OutDiscards OutNoRoutes ReasmTimeout ReasmReqds ReasmOKs ReasmFails FragOKs FragFails FragCreates
Ip: 1 64 25922988125 0 0 15771700 0 0 25898327616 22789396404 12987882 51 1 10129840 2196520 1 0 0 0
...
Fields:
// https://github.com/torvalds/linux/blob/v5.10/include/uapi/linux/snmp.h#L21
/* ipstats mib definitions */
enum {
IPSTATS_MIB_NUM = 0,
IPSTATS_MIB_INPKTS, /* InReceives */
IPSTATS_MIB_INOCTETS, /* InOctets */
IPSTATS_MIB_INDELIVERS, /* InDelivers */
...
$ netstat -s
Ip:
397147220 total packets received
621 with invalid headers
1 with invalid addresses
16591642 forwarded
...
Tcp:
53687405 active connections openings
449771 passive connection openings
52888864 failed connection attempts
66565 connection resets received
...
TcpExt:
18 ICMP packets dropped because they were out-of-window
4 ICMP packets dropped because socket was locked
643745 TCP sockets finished time wait in fast timer
8 packets rejects in established connections because of timestamp
...
netstat_output() {
PATTERN=$1
ARG_IDX=$2
METRIC=$PREFIX"_tcp"
VAL=$(netstat -s | grep "$PATTERN" | awk -v i=$ARG_IDX '{print $i}')
# generate "type" string with prefix and pattern
#
# 1. replace whitespaces with underlines
# 2. remove trailing dollar symbol ('$') if there is
#
# e.g. "fast retransmits$" -> "fast_retransmits"
#
TYP=$(echo "$PATTERN" | tr ' ' '_' | sed 's/\$//g')
TAGS="{\"type\":\"$TYP\"}";
echo $METRIC$TAGS $VAL;
}
netstat_output "segments retransmited" 1
netstat_output "TCPLostRetransmit" 2
netstat_output "fast retransmits$" 1
netstat_output "retransmits in slow start" 1
netstat_output "classic Reno fast retransmits failed" 1
netstat_output "TCPSynRetrans" 2
netstat_output "bad segments received" 1
netstat_output "resets sent$" 1
netstat_output "connection resets received$" 1
netstat_output "connections reset due to unexpected data$" 1
netstat_output "connections reset due to early user close$" 1
Run:
$ ./collect-network-stats.sh
network_tcp{"type":"segments_retransmited"} 618183
network_tcp{"type":"TCPLostRetransmit"} 133668
network_tcp{"type":"fast_retransmits"} 45745
network_tcp{"type":"retransmits_in_slow_start"} 62977
network_tcp{"type":"classic_Reno_fast_retransmits_failed"} 418
network_tcp{"type":"TCPSynRetrans"} 175919
network_tcp{"type":"bad_segments_received"} 399
network_tcp{"type":"resets_sent"} 234094
network_tcp{"type":"connection_resets_received"} 66553
network_tcp{"type":"connections_reset_due_to_unexpected_data"} 93589
network_tcp{"type":"connections_reset_due_to_early_user_close"} 6522
Grafana queries:
avg(irate(network_tcp{host="$hostname"})*60) by (type)
/proc/net/snmp$ cat /proc/net/snmp
...
Udp: InDatagrams NoPorts InErrors OutDatagrams RcvbufErrors SndbufErrors InCsumErrors IgnoredMulti
Udp: 3251496 356 0 3251774 0 0 0 0
UdpLite: InDatagrams NoPorts InErrors OutDatagrams RcvbufErrors SndbufErrors InCsumErrors IgnoredMulti
UdpLite: 0 0 0 0 0 0 0 0
/proc/net/udp$ cat /proc/net/udp
sl local_address rem_address st tx_queue rx_queue tr tm->when retrnsmt uid timeout inode ref pointer drops
52544: 3F40160A:007B 00000000:0000 07 00000000:00000000 00:00000000 00000000 38 0 190750 2 000000009f44ff46 0
52544: 016C000A:007B 00000000:0000 07 00000000:00000000 00:00000000 00000000 38 0 85972 2 00000000ab7f749c 0
52544: 7136060A:007B 00000000:0000 07 00000000:00000000 00:00000000 00000000 38 0 59580 2 000000004c64a4a4 0
52544: 0100007F:007B 00000000:0000 07 00000000:00000000 00:00000000 00000000 0 0 55725 2 0000000051afcbdd 0
52544: 00000000:007B 00000000:0000 07 00000000:00000000 00:00000000 00000000 0 0 55719 2 000000008c653c2d 0
The first line describes each of the fields in the lines following:
sl: Kernel hash slot for the socketlocal_address: Hexadecimal local address of the socket and port number, separated by :.rem_address: Hexadecimal remote address of the socket and port number, separated by :.st: The state of the socket. Oddly enough, the UDP protocol layer seems to use some TCP socket states. In the example above, 7 is TCP_CLOSE.tx_queue: The amount of memory allocated in the kernel for outgoing UDP datagrams.rx_queue: The amount of memory allocated in the kernel for incoming UDP datagrams.tr, tm->when, retrnsmt: These fields are unused by the UDP protocol layer.uid: The effective user id of the user who created this socket.timeout: Unused by the UDP protocol layer.inode: The inode number corresponding to this socket. You can use this to help you determine which user process has this socket open. Check /proc/[pid]/fd, which will contain symlinks to socket[:inode].ref: The current reference count for the socket.pointer: The memory address in the kernel of the struct sock.drops: The number of datagram drops associated with this socket. Note that this does not include any drops related to sending datagrams (on corked UDP sockets or otherwise); this is only incremented in receive paths as of the kernel version examined by this blog post.Printing code: net/ipv4/udp.c.
Top-N nodes for some specific metrics:
This is quite helpful for detecting problematic nodes.
Queries for these panels are very similar, we list some here:
topk(10, avg(irate(k8s.node.network.tcp{type="segments_retransmited"})*60) by (host))topk(10, avg(irate(k8s.node.network.tcp{type="TCPSynRetrans"})*60) by (host))topk(10, avg(irate(k8s.node.network.nic.errors{type=~'rx_.*'})*60) by (host))topk(10, avg(irate(k8s.node.network.nic.errors{type=~'tx_.*'})*60) by (host))This post serves as a introductory guide for how to monitoring you network stack with Prometheus and Grafana.
Actually there are more metrics than we have shown in the above, such as, you could monitor the NIC bandwidth with metrics from NIC statistics:
Besides, you could also configure alerting rules on Grafana panels, e.g. alerting when NIC errors exceeds a pre defined threshold.